+
In jumper position 2, any external TDIF-compatible equipment must be synchronized
via the external word clock connection.
WARRANTY
+
For our current warranty terms, please refer to our website at
http://www.behringer.com, or send us a request via e-mail at [email protected],
fax at +49 2154 920 665, or telephone at +49 2154 920 666.
1.
If the left pair of contacts are bridged via two jumpers (factory default), any
equipment connected to the TDIF interface receives the word clock signal
generated by the DDX3216. We recommend this setting for most TDIF-compatible
units. Please select external word clock synchronization on the external unit
connected to the TDIF interface.
2
.
If the right pair of contacts are bridged, any equipment connected to the TDIF
interface receives its own word clock signal, i.e. the word clock signal generated
by the external equipment is looped through the TDIF interface back to the external
unit. This allows the use of TDIF-compatible units that cannot be synchronized via
external word clock signals transmitted through the TDIF interface. Position 2
should be used with first-generation TASCAM
®
DA88
®
recorders or if you should
experience synchronization problems with position 1.
Specifications:
Digital Input/Output
Type
25 Pol D-Sub
Standard
TDIF-compatible
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
Installing the TDF1616
Jumper settings:
The DDX3216 TDIF interface features a 2 x 3 plug-in contact strip that can be bridged via two jumpers,
allowing word clock synchronization to be adapted to any external equipment acting as a word clock
slave to the DDX3216. The contact strips are located approximately in the middle of the circuit board.
