Behringer SYSTEM 15, Quick Start Manual

Page: 3 / 7

4
SYSTEM 15 Quick Start Guide
5
Modules
Your System 15 has two rows of modules
Top Row
(1)
914 Fixed Filter Bank (FFB).
(2)
923 Filters and Noise Sources.
(3)
904B High Pass Filter (HPF
(4)
904A Low Pass Filter (LPF).
(5)
&
(6)
902 Voltage Controlled Amplifiers (VCA).
(6)
&
(8)
911 Envelope Generators (EG).
Bottom Row
(1)
921A Oscillator Driver.
(2)
&
(3)
921B Voltage Controlled Oscillators (VCO).
(4)
921 Voltage Controlled Oscillator (VCO/LFO).
(5)
CP3A – M
(6)
CP35 Attenuator / Voltage Source / Multiple.
(7)
961 Interface.
(8)
CM1A – MIDI interface.
Further information on all modules can be found on their individual Quick Start Guides at www.behringer.com/downloads.html
(1) (2) (3) (4) (5) (6) (7) (8)
(1) (2) (3) (4) (5) (6) (7) (8)
System 15 - Getting Started
CONNECTION
To connect the System 15 to your system, please consult the connection guides in specific patches.
HARDWARE SETUP
Make all the connections in your system. Keep the System 15 power turned off when making any connections.
Ensure your sound system is turned down.
Turn on the System 15 before turning on any power amplifiers and turn it off last. This will help prevent any turn on or turn off “pops or thumps” in your speakers.
WARM UP TIME
We recommend leaving 30 minutes or more time for the System 15 to warm up before recording or live performance. (Longer if it has been brought in from the cold.)
This will allow the precision circuits time to reach their normal operating temperature and tuned performance.
System 15 Patches
Expressive Lead 1
Voltage Control (pitch)
Source Destination
External MIDI Keyboard – MIDI Out CM1A MIDI Interface MIDI In
CM1A CV Output 921A Frequency Input
921A Frequency Output 921B Frequency Link (in series)
Audio
921B Waveform outs (three of four) CP3A-M Inputs
CP3A-M Output 904A Signal Input
904A Signal Output 902 Signal Input
902 Signal Output Your mixer/amplifier/DAW
Voltage Control (amplitude)
CM1A s-trigger Output Multiple
Multiple Output (two of) 2 x 911 s-trigger Input
1st 911 Output 1st 902 Control Input
MIDI Out To mixer/amplifier/DAW