Installation
The necessary screws are included with the module for mounting
in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes
spaced 2 HP apart along the length of the case, or a track that
allows individual threaded plates to slide along the length
of the case. The free-moving threaded plates allow precise
positioning of the module, but each plate should be positioned in
the approximate relation to the mounting holes in your module
before attaching the screws.
Hold the module against the Eurorack rails so that each of the
mounting holes are aligned with a threaded rail or threaded
plate. Attach the screws part way to start, which will allow
small adjustments to the positioning while you get them all
aligned. After the final position has been established, tighten the
screws down.
Specifications
Inputs
Phase shifter signal input
Type
3.5 mm TS jack, AC coupled
Impedance
70 kΩ, unbalanced
Max input level
+16 dBu
Phase shifter CV input
Type
3.5 mm TS jack, DC coupled
Impedance
>50 kΩ, unbalanced
Max input level
+10 V
CV range
0 V to +10 V
Audio delay signal input
Type
3.5 mm TS jack, AC coupled
Impedance
15 kΩ, unbalanced
Max input level
+20 dBu
Audio delay CV input
Type
3.5 mm TS jack, DC coupled
Impedance
>70 kΩ, unbalanced
Max input level
+10 V
CV range
0 V to +10 V
Gate input
Type
3.5 mm TS jack, DC coupled
Impedance
47 kΩ, unbalanced
Max input level
+10 V
CV range
0 V to +10 V
Outputs
Phase shifter signal output
Type
3.5 mm TS jack, DC coupled
Impedance
1 kΩ, unbalanced
Max output level
+18 dBu
Audio delay signal output
Type
3.5 mm TS jack, DC coupled
Impedance
1 kΩ, unbalanced
Max output level
+16 dBu
LFO output
Type
2 x 3.5 mm TS jacks, DC coupled
Impedance
1.2 kΩ
Max output level
10 V p-p
Gate output
Type
3.5 mm TS jack, DC coupled
Impedance
500 Ω
Max output level
+5 V
Controls
Phase shifter effect switch
Off / on
Phase shifter mod intensity
-∞ to unity gain
Phase Shift frequency
200 Hz to 8 kHz
Phase shifter resonance
Off to maximum resonance
Audio delay effect switch
Off / on
Audio delay mod intesity
-∞ to unity gain
Audio delay time
1 ms to 7 ms
Audio delay resonance
Off to maximum resonance
LFO frequency
0.02 Hz to 10 Hz
Gate Threshold
0.3 V to 5 V
Gate delay time
0.3 ms to 6 s
Gate time
0.3 ms to 6 s
Power
Power supply
Eurorack
Current draw
60 mA (+12 V), 60 mA (-12 V)
Physical
Dimensions
44 x 81 x 129 mm
(1.7 x 3.2 x 5.1")
Rack units
16 HP
Weight
0.19 kg (0.42 lbs)
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and
other information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone
and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
