connection is successful, will hear the voice prompt “connected “
Notes:
In the process of pairing, some mobile phone requires inputting pairing password, please input "0000";
The headset will automatically shut down if it cannot find the paired device in 3-5 minutes;
If the Bluetooth headset is not in the pairing state, your mobile phone or other Bluetooth devices will not be
able to search to the headset, please set the headset to the pairing state and then use the mobile phone to search
again.
IV. Bluetooth wireless call
When the Bluetooth headset is paired and connected with your mobile phone, you can use the headset to answer
the phone or listen to the stereo music played mobile phone.
(1) Dial-out, answer and hang up of calls by mobile phone
Outgoing calls
1. Dial-out by mobile phone: Use your mobile phone to dial according to the way as usual, after dialing out, the
headset will make a ringing tone, the voice will be automatically switched to the Bluetooth headset after putting
through. (Some smart phones need to have a choice.)
2. Last number redial: Double-click the center key to dial out the last dialing phone number.
Answering and hanging up calls
When a call comes in, you will hear a phone prompt sent by the headset.
1.
When the phone rings, press center key once or press the phone answer key to answer the phone.
2.
When the phone rings, press center key twice to refuse the phone.
3.
If you are in call, long press “ + “to increase the headset volume, and long press” – “to decrease the
headset volume.
4. Short press center key, phone hang-up key or hang up by the other end to end the call, if the mobile phone
is connected with playing stereo music, the phone will continue to play the music after ending the call.
V. Wireless stereo music playing
The paired mobile phone shall support Bluetooth A2DP.
1. When the music is played, long press “-“ to make the music jump to the previous song..
2. When the music is played, long press “+” to make the music jump to the next song.
3. When the music is played, press center key to stop the music, and then press center to continue playing the
music.
4.When the music is played, long press “+” to increase the headset volume, and long press “-“ to decrease the
headset volume.
5. During the stereo playing, if there is dial-up or call, the stereo playing will be automatically suspended, and
the stereo music will continue to be played at the end of the phone.
VI. Low voltage automatic detection and power off
When the machine voltage is less than 3.3V, the red light will flash, will hear the battery low voice prompt.
When the voltage is less than 3V, the headset will automatically power off. Please recharge in time.
VII. Battery power indication:
Paired IPHONE mobile, it will have headset battery power indication.
