Behringer RD-9, User Manual

Page: 25 / 38

25
RHYTHM DESIGNER RD-9 User Manual
Song Parameters
Some of the parameters in the Song Data file are comparable to the Global Parameters. When these parameters are in use (i.e. the corresponding Preference is set to
Song), loading a new song will trigger the corresponding change in the sequencer. A tempo change is one such example.
Preference Name Description Values
Tempo The tempo of the song is stored. 20 – 240 BPM
Swing The Swing level is stored. 50 – 75 %
Probability The probability of a step being heard is stored per song. 0 – 100 %
Flam The flam level is stored per song 0 - 24
Filter Mode Filter Mode is stored per song, either LPF or HPF. 0 = LPF,
1 = HPF
Filter Enable Whether the filter is on/off per song. 0 = Off,
1 = On
Filter Automation Automation of the filter is stored per song. 0 = Inactive,
1 = Active
Filter Step Values
(1 - 64)
Filter step values per song are stored. 0 – 255
Polymeter Polymeter is either on/off per song. 0 = Off,
1 = On
Step Size Step size is stored for the song. 0 = 1/8
th
,
1 = 1/8
th
Tr,
2 = 1/16
th
,
3 = 1/16
th
Tr,
4 = 1/32
nd
th
Auto Advance Whether or not the song will auto advance to the next or not is stored per song. 0 = Off,
1 = On
FX Bus Sends Whether or not the FX bus send is active or not, stored per song. 0 = Inactive,
1 = Active
Mute Voices Which voices are muted, stored by song. 0 = Inactive,
1 = Active
Solo Voices Which voices are soloed, stored by song. 0 = Inactive,
1 = Active
Accent Mode Accent Mode is stored per song. 0 = Global,
1 = Independent
Accent Values (1 - 10) Accent Values are stored per song. Global Accent Values
(1 - 10)