background image

20

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted

in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the

express written permission of BEHRINGER GmbH.

BEHRINGER is a registered trademark. ALL RIGHTS RESERVED © 1998 BEHRINGER.

BEHRINGER INTERNATIONAL GmbH, Hanns-Martin-Schleyer-Str. 36-38, D-47877 Willich-Münchheide II

Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30

ship. The warranty does not cover any such modification/adapta-

tion, irrespective of whether it was carried out properly or not. Un-

der the terms of this warranty, BEHRINGER INTERNATIONAL shall

not be held responsible for any cost resulting from such a modifica-

tion/adaptation.
3. Free inspections, maintenance/repair work and replacement of

parts are expressly excluded from this warranty, in particular if

caused by inappropriate use. Likewise, the warranty does not cover

defects of expendable parts caused by normal wear of the product.

Expendable parts are typically faders, potentiometers, switches

and similar components.
4. Damages/defects caused by the following conditions are not

covered by this warranty:

s

misuse, neglect or failure to operate the unit in compliance

with the instructions given in the user or service manuals.

s

connection or operation of the unit in any way that does not

comply with the technical or safety regulations applicable in

the country where the product is used.

s

damages/defects that are caused by force majeure or by any

other condition beyond the control of BEHRINGER INTERNA-

TIONAL.

5. Any repair carried out by unauthorized personnel will void the

warranty.
6. Products which do not meet the terms of this warranty will be

repaired exclusively at the buyer’s expense. BEHRINGER INTER-

NATIONAL will inform the buyer of any such circumstance. If the

buyer fails to submit a written repair order within 4 weeks after

notification, BEHRINGER INTERNATIONAL will return the unit

C.O.D. with a separate invoice for freight and packing. Such cost

will also be invoiced separately when the buyer has sent in a writ-

ten repair order.

§ 5 WARRANTY TRANSFERABILITY

This warranty is extended exclusively to the original buyer (cus-

tomer of retail dealer) and is not transferable to anyone who may

subsequently purchase this product. No other person (retail dealer,

etc.) shall be entitled to give any warranty promise on behalf of

BEHRINGER INTERNATIONAL.

§ 6 CLAIM FOR DAMAGES

Failure of BEHRINGER INTERNATIONAL to provide proper war-

ranty service shall not entitle the buyer to claim (consequential)

damages. In no event shall the liability of BEHRINGER INTERNA-

TIONAL exceed the invoiced value of the product.

§ 7 OTHER WARRANTY RIGHTS

This warranty does not exclude or limit the buyer’s statutory rights

provided by national law, in particular, any such rights against the

seller that arise from a legally effective purchase contract.

§ 1 WARRANTY CARD

To be protected by this warranty, the buyer must complete and

return the enclosed warranty card (signed/stamped by retail dealer)

within 14 days of the date of purchase to BEHRINGER INTERNA-

TIONAL (address see § 3). Failure to return the card in due time

(date as per postmark) will void any extended warranty claims.

§ 2 WARRANTY

1. BEHRINGER INTERNATIONAL warrants the mechanical and

electronic components of this product to be free of defects in mate-

rial and workmanship for a period of one (1) year from the original

date of purchase, in accordance with the warranty regulations de-

scribed below. If any defects occur within the specified warranty

period that are not caused by normal wear or inappropriate use,

BEHRINGER INTERNATIONAL shall, at its sole discretion, either

repair or replace the product.
2. If the warranty claim proves to be justified, the product will be

returned freight prepaid by BEHRINGER INTERNATIONAL within

Germany. Outside of Germany, the product will be returned at the

buyer’s expense.
3. Warranty claims other than those indicated above are expressly

excluded.

§ 3 RETURN AUTHORIZATION NUMBER

1. To obtain warranty service, the buyer must call BEHRINGER

INTERNATIONAL during normal business hours BEFORE return-

ing the product (Tel.: +49 (0) 21 54 / 92 06 66). All inquiries must be

accompanied by a description of the problem. BEHRINGER IN-

TERNATIONAL will then issue a return authorization number.
2. The product must be returned in its original shipping carton,

together with the return authorization number, to the following ad-

dress:

BEHRINGER INTERNATIONAL GmbH

Service Department

Hanns-Martin-Schleyer-Str. 36-38

D - 47877 Willich-Münchheide

3. Shipments without freight prepaid will not be accepted.

§ 4 WARRANTY REGULATIONS

1. Warranty services will be furnished only if the product is accom-

panied by an original retail dealer’s invoice. Any product deemed

eligible for repair or replacement by BEHRINGER INTERNATIONAL

under the terms of this warranty will be repaired or replaced within

30 days of receipt of the product at BEHRINGER

INTERNATIONAL.
2. If the product needs to be modified or adapted in order to comply

with applicable technical or safety standards on a national or local

level, in any country which is not the country for which the product

was originally developed and manufactured, this modification/ad-

aptation shall not be considered a defect in materials or workman-

10. WARRANTY

10. WARRANTY

Summary of Contents for Promixer DX 500























Reviews: