page 5 of 10
985-40000-01084 Rev.A
2021-02-03
Confidential, for internal use only. Not to be reproduced.
page 5 of 10
Synthesizers and Samplers
POLY D
Start PITCH WHEEL Dead Zone Calibration
1. First release PITCH WHEEL.
2. Press button “2” to calibrate PITCH WHEEL dead zone.
3. Button “2” LED will light on and region A LEDs will indicate current PITCH WHEEL position.
Calibrate PITCH WHEEL dead zone
Move the PITCH WHEEL within the dead zone where you don't feel the tension of the spring. This will ensure that no
pitch information is sent while pitch wheel is not being touched.
