19
ULTRA-Q PRO PEQ2200
8.2 Inserting an equalizer in the signal path
The best point to insert the ULTRA-Q PRO in the signal path depends on the task on hand: basically, it can be
inserted in the line insert points of the mixing console, subgroup inserts, subgroup outputs, effect paths or
between signal processor(s) and mixing console / power amp, etc.
If you use a delay line unit (e.g. used in sound systems with additional room speakers) to make up for run-time
differences, the ULTRA-Q PRO can be inserted either before or after the delay line unit.
If several similar speaker systems are controlled simultaneously (e.g. in a conference room), and if these
systems are positioned at different distances to the stage, you can use a delay line unit with multiple outputs
providing different delay times. In such a case the ULTRA-Q PRO should be inserted before the delay line unit.
In complex sound reinforcement systems comprising different speakers located in varying acoustic
environments (e.g. theaters with front speakers, various side-fill speakers and/or balcony speakers) each
single time-delayed channel should be equipped with a separate ULTRA-Q PRO, as this is the only way to
make provision for varying room acoustic and to adapt the speakers specifically.
8.3 What equalizers cant do
Equalizers are not a miracle cure for poor audio systems, but can be highly useful and efficient audio tools to
musically fine-tune such a system. Fine-tuning often delivers astounding results in terms of acoustic power
and overall sound quality. Equalizers are definitely the most important accessories of your audio system. They
can work wonders when they are used properly, just as the old saying goes:
Its the tone that makes the music!
8. SPECIAL APPLICATIONS
