(EN)
Controls
FILTAMP MODULE 1006 Controls
(1)
FILTER
– Adjusts the cutoff frequency for the filter.
(2)
FILTER RESONANCE
– Boosts the resonance frequencies selected
with the Filter knob, potentially causing VCF oscillation.
(3)
AMPLIFIER GAIN
– Controls the level of the VCA.
(4)
KEYBOARD knob
– Attenuate the voltage connected to the KYBD
input, which controls the cutoff frequency of the filter.
(5)
IN B knob
– Adjusts the level of the signal connected to the
IN B input.
(6)
CV 2 to VCF knob
– Attenuate the voltage that is passed from the
CV 2 input to the VCF.
(7)
IN A knob
– Adjusts the level of the signal connected to the
IN A input.
(8)
CV 1 to VCF knob
– Attenuate the voltage that is passed from the
CV 1 input to the VCF.
(9)
EXPONENTIAL/LINEAR switch
– Select between a linear or more
natural exponential VCA response.
(10)
CV 2 to VCA knob
– Attenuate the voltage that is passed from the
CV 2 input to the VCA.
(11)
CV 1 to VCA knob
– Attenuate the voltage that is passed from the
CV 1 input to the VCA.
(12)
IN A
– Connect an input signal via 3.5 mm TS cable.
(13)
IN B
– Connect an input signal via 3.5 mm TS cable.
(14)
KYBD
– Connect a voltage that can be used to control the VCF
frequency.
(15)
CV 1
– Connect a voltage that can be used to control the VCF
frequency or VCA level.
(16)
CV 2
– Connect a voltage that can be used to control the VCF
frequency or VCA level.
(17)
OUT
– Send the processed signal to other modules via 3.5 mm
TS cable.
(4)
(9)
(1)
(2)
(3)
(12) (13) (14) (15) (16) (17)
(10)
(11)
(5)
(7)
(6)
(8)
4
5
Quick Start Guide
FILTAMP MODULE 1006
Summary of Contents for FILTAMP MODULE 1006
Page 13: ...We Hear You...
