Behringer Europower PMH660M User Manual Download Page 13

13

                                EUROPOWER PMH660M/PMH880S

7. WARRANTY

7. WARRANTY

§ 1 WARRANTY CARD/ONLINE REGISTRATION

To  be  protected  by  the  extended  warranty,  the  buyer  must

complete and return the enclosed warranty card within 14 days

of the date of purchase to BEHRINGER Spezielle Studiotechnik

GmbH, in accordance with the conditions stipulated in § 3. Failure

to return the card in due time (date as per postmark) will void any

extended warranty claims. Based on the conditions herein, the

buyer may also choose to use the online registration option via

the  Internet  (www.behringer.com  or  www.behringer.de).

§ 2 WARRANTY

1. BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH

including all BEHRINGER subsidiaries listed on the enclosed page,

except  BEHRINGER  Japan)  warrants  the  mechanical  and

electronic  components  of  this  product  to  be  free  of  defects  in

material and workmanship for a period of one (1) year* from the

original  date  of  purchase,  in  accordance  with  the  warranty

regulations  described  below.  If  the  product  shows  any  defects

within the specified warranty period that are not excluded from

this warranty as described under § 4, BEHRINGER shall, at its

discretion,  either  replace  or  repair  the  product  using  suitable

new or reconditioned parts. In the case that other parts are used

which  constitute  an  improvement,  BEHRINGER  may,  at  its

discretion, charge the customer for the additional cost of these

parts.

2. If the warranty claim proves to be justified, the product will

be returned to the user freight prepaid.

3.  Warranty  claims  other  than  those  indicated  above  are

expressly  excluded.

§ 3 RETURN AUTHORIZATION NUMBER

1.  To  obtain  warranty  service,  the  buyer  (or  his  authorized

dealer) must call BEHRINGER (see enclosed list) during normal

business hours 

BEFORE

 returning the product. All inquiries must

be accompanied by a description of the problem. BEHRINGER

will then issue a return authorization number.

2. Subsequently, the product must be returned in its original

shipping carton, together with the return authorization number to

the address indicated by BEHRINGER.

3. Shipments without freight prepaid will not be accepted.

§ 4 WARRANTY REGULATIONS

1.  Warranty  services  will  be  furnished  only  if  the  product  is

accompanied  by  a  copy  of  the  original  retail  dealer’s  invoice.

Any product deemed eligible for repair or replacement under the

terms of this warranty will be repaired or replaced.

2. If the product needs to be modified or adapted in order to

comply with applicable technical or safety standards on a national

or local level, in any country which is not the country for which

the  product  was  originally  developed  and  manufactured,  this

modification/adaptation  shall  not  be  considered  a  defect  in

materials  or  workmanship.  The  warranty  does  not  cover  any

such  modification/adaptation,  irrespective  of  whether  it  was

carried  out  properly  or  not.  Under  the  terms  of  this  warranty,

BEHRINGER shall not be held responsible for any cost resulting

from such a modification/adaptation.

3. Free inspections and maintenance/repair work are expressly

excluded from this warranty, in particular, if caused by improper

handling of the product by the user. This also applies to defects

caused  by  normal  wear  and  tear,  in  particular,  of  faders,

crossfaders, potentiometers, keys/buttons, tubes, guitar strings,

illuminants and similar parts.

4.  Damages/defects  caused  by  the  following  conditions  are

not  covered  by  this  warranty:

s

improper  handling,  neglect  or  failure  to  operate  the  unit  in

compliance with the instructions given in BEHRINGER user

or service manuals.

s

connection or operation of the unit in any way that does not

comply with the technical or safety regulations applicable in

the  country  where  the  product  is  used.

s

damages/defects  caused  by  force  majeure  or  any  other

condition that is beyond the control of BEHRINGER.

5. Any repair or opening of the unit carried out by unauthorized

personnel  (user  included)  will  void  the  warranty.

6. If an inspection of the product by BEHRINGER shows that

the  defect  in  question  is  not  covered  by  the  warranty,  the

inspection costs are payable by the customer.

7. Products which do not meet the terms of this warranty will

be repaired exclusively at the buyer’s expense. BEHRINGER will

inform the buyer of any such circumstance. If the buyer fails to

submit  a  written  repair  order  within  6  weeks  after  notification,

BEHRINGER will return the unit C.O.D. with a separate invoice

for  freight  and  packing.  Such  costs  will  also  be  invoiced

separately when the buyer has sent in a written repair order.

§ 5 WARRANTY TRANSFERABILITY

This  warranty  is  extended  exclusively  to  the  original  buyer

(customer  of  retail  dealer)  and  is  not  transferable  to  anyone

who may subsequently purchase this product. No other person

(retail dealer, etc.) shall be entitled to give any warranty promise

on behalf of BEHRINGER.

§ 6 CLAIM FOR DAMAGES

Failure of BEHRINGER to provide proper warranty service shall

not  entitle  the  buyer  to  claim  (consequential)  damages.  In  no

event shall the liability of BEHRINGER exceed the invoiced value

of  the  product.

§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW

1. This warranty does not exclude or limit the buyer’s statutory

rights  provided  by  national  law,  in  particular,  any  such  rights

against  the  seller  that  arise  from  a  legally  effective  purchase

contract.

2. The warranty regulations mentioned herein are applicable

unless they constitute an infringement of national warranty law.

* Customers in the European Union please contact BEHRINGER

Germany Support for further details.

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names

of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use

neither constitutes a claim of the trademarks by BEHRINGER

®

 nor affiliation of the trademark owners with BEHRINGER

®

. BEHRINGER

®

 accepts no

liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained

herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not

agents of BEHRINGER

®

 and have absolutely no authority to bind BEHRINGER

®

 by any express or implied undertaking or representation. No part of this

manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for

any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER

®

 is a registered trademark.

ALL RIGHTS RESERVED. © 2004 BEHRINGER Spezielle Studiotechnik GmbH,

Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

Summary of Contents for Europower PMH660M














Reviews: