Page 2 of 5
Independent DC and thermal
overload protection on each channel
automatically protects amplifier and
speakers without shutting down
the show
“Back-to-front” ventilation
system including air filter for
reliable operation
“
Built-like-a-tank”, impact-resistant,
all-steel 2U rackmount chassis
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Accelerated Transient Response
delivers the knock-out punch
It takes huge pulses of energy
(current and voltage) to propel a woofer
cone out fast enough to match a bass
beat. That’s called Transient Response
and it’s the holy grail of amp designers.
By carefully selecting transistors with
extremely high slew rates and optimizing
other proprietary parts of our circuitry,
our amps are able to react instantly
to even the most demanding electronic
bass impulses. If the woofers in your PA
system can keep up, your audience will hear
a tighter, crisper, more natural sound.
Instead of operating relatively
continuously like Class AB circuits, Class H
amps, which were first described in NASA
technology (U.S. patent 3,319,175), feature
rail tracking for effectively modulating the
power supply rails with only the peaks
of the input signal. This technology
has revolutionized pro audio amp
designs with its outstanding performance
and efficiency. When combined with
switching-mode power supplies that
replace heavy toroid transformers, our
new designs provide more dynamic
punch and, because they are so much
more efficient, run cooler and don’t
require huge, heavy heat sinks.
BEHRINGER didn’t invent Class H
technology, but our R&D Department
has been working for years to perfect our
own version, creating lightweight amps
that run cool and also achieve our goal of
Accelerated Transient Response.
Everything you need, nothing you don't
The simple front panel controls of
these amps give you all of your sound’s
vital signs at a glance. After pressing
the Power Button, the POWER LED will
light when the amp is ready for action.
Both channels have independent gain
dials as well as clip LEDs that indicate
when the signal is distorted and you need
to reduce the gain. There are also SIGNAL
LEDs that light up when a signal is present at
the input.
0
-10
-20
3000-WATT STEREO POWER AMPLIFIER
Signal level LED meter
with clipping LED
Ventilation
openings
Detented channel
GAIN controls
Power
Switch
IEC power
socket
Cooling fans
Professional locking
speaker connections
“Touch-proof”
binding posts
speaker outputs
Built-in CROSSOVER
switch — dedicated
100 Hz CH1/CH2 or
FULLRANGE
MODE switch—
mono/stereo/bridge
LIMITER on/off
switch
INPUT accepts
balanced XLR, 1/4" TRS,
and unbalanced
1/4" TS and RCA
connections
Front Panel
Rear Panel
Continued on next page
EUROPOWER
EPX3000/EPX2000
