EUROLIVE E1220A/E1520A
Application examples
6
Control elements and connections
Fig. 2.2:
(E1220A and E1520A)
The mains connection is established using a cable with
{9}
an
IEC
mains connector. This cable is packaged with the
E1220A/E1520A. To avoid ground-loop hum, loudspeak-
ers and mixing consoles should be connected to the same
power circuit.
You can replace fuses at the
[10]
FUSE SWITCH
of the
E1220A/E1520A. Always replace fuses with the same type.
Please follow the instructions given in chapter 5 “SPECIFI-
CATIONS.”
Press
[11]
POWER
to turn on your E1220A/E1520A.
The POWER switch does not fully disconnect the unit
+
from the mains. To disconnect the unit from the mains,
pull out the main cable plug or appliance coupler. When
installing the product, ensure the plug or appliance
coupler is readily operable. Unplug the power cord
completely when the unit is not used for prolonged
periods of time.
SERIAL NUMBER
[12]
Application examples
3.
Turn the LEVEL control fully to the left before you switch
+
on the unit with the POWER switch. Then, raise the
volume to a suitable level.
Using a mixing console
3.1
A common way to use 2 E1220A/E1520A loudspeakers is with
a mixing console. In this case, connect each of the main outputs
that are on the mixing console to a E1220A/E1520A loudspeaker.
The E1220A/E1520A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.
Using several E1220A/E1520A loudspeakers
3.2
EUROLIVE E1520A
INPUT
INPUT
INPUT
Output L
Output R
INPUT
LINK OUTPUT
LINK OUTPUT
EURORACK UB2442FX-PRO
Wiring several E1220A/E1520A loudspeakers using
Fig. 3.1:
the LINK OUTPUT connector
For larger rooms, you can connect several E1220A/E1520A speak-
ers using the LINK OUTPUT connector
{3}
(see fig. 3.1).
Direct connection of a stereo signal source
3.3
When you use two E1220A/E1520A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
