page 3 of 4
Loudspeaker Systems
EUROLIVE
B205D
Locate and remove IC1 and IC2. Inspect the circuit
board and components for any heat damage, and
replace as needed.
Remove the Main PCB from its metal enclosure.
Carefully prepare the legs of the new voltage
regulators, to the dimensions shown in
this drawing.
Insert the new IC1 and IC2 in position, so they are
the same height as the nearby diodes D5 and D6,
then solder them in place.
4.0 mm
9.0 mm
(this is the most
important dimension)
Bend where the legs change width
3.5 mm
6.0 mm
