Behncke Control 1.3, Operating Manual

Page: 28 / 60

Control 1.3 Swimming Pool Control Unit
Operation
26

The reason for which the message appeared
6.4.2.6 Setting the Time & Date
The user can set the current date and time in the control unit in the “Date/Time” submenu. The values are
stored in the control unit so that these values do not need to be reset after a power failure.
6.4.2.7 Setting the Language
The user can change the language of the control unit in the “Language” submenu. The language of the
control unit is changed by tapping on the respective blue button with the desired language. This changes
the button labelling in all menus. The system automatically switches to the higher menu level after tapping
on a language button.
6.4.3 Treatment Settings Menu
6.4.3.1 Switching Times
You need to go to the Treatment

Switching Times submenu to set the switching times of the filter
pump. This is shown as a diagram in Figure 2. Please set the parameters in the sequence shown in this
operating manual.
Figure 2
: “Switching Times” submenu
In field

you choose whether individual switching times or the same switching times should be selected for
each day or whether different switching times should be selected for weekdays and weekend days.
In field

you choose the day for which the 6 switching times apply.
In field

you set the time of the individual switching time.
In field

you set the mode of the individual switching time.
6.4.3.2 Filter Cleaning
The following parameters can be set in the “Backwashing” menu:
- Trigger backwashing
- Backwashing switching times
1
2
3
4