SKO 300T Manual
INSTALL THE APPLIANCE ON THE WALL
l
Place the paper on the wall in the position you would like to install the appliance. Drill two
holes as marked on the paper (Fig. 1).
NOTE: REMOVE THE PAPER AFTER DRILLING THE HOLES.
l
Insert plugs in the holes if needed, and then insert the screws and tighten them (Fig. 2).
l
Hang the shoe dryer on the wall onto the screws, and pull it (Fig. 3).
l
Move the shoe dryer to the right until it stops, then pull it downwards (Fig. 4).
l
The bottom of the appliance should not be more than 0.6m (23,6 inches) from the floor.
> 50cm
Fig. 3
Fig. 4
Plug_Screw
Fig. 1
> 50cm
Screw
Fig. 2
Please put the paper in the place on the wall
where you prefer and drill two holes.
!!ATTENTION:TAKE AWAY THE PAPER AFTER DRILLED.
ON
180'
OF
F
60'
120'
≥
6
0cm
