BEHA ORC 1527, Instruction Manual

Page: 26 / 27

Operation
Normal Mode : under this mode, the heater works at the setting level, after
reaching the setting temperature, it stops heating and the setting temperature flashes.
Fast-heating mode under this mode, the heater works normally, the level and
setting temperature are not adjustable, the heater works at default setting
temperature(35
℃
)and the indicator light circle indicates red.
Energy Saving Mode : under this mode, the heater works normally, the level and
setting temperature are not adjustable, the heater works at default setting temperature
(22
℃
). (In Energy Saving
0RGH
, if the setting temperature flashes, it means the
heater is under energy saving heat preservation work state).The indicator light circle
indicates green.
Anti-Freezing Mode : under this mode, press the knob to adjust the level, but the
setting temperature is not adjustable, the heater works at default anti-freezing
temperature(5
℃ ). (In Anti-Freezing
0RGH
, if the setting temperature flashes, it means
the heater is under anti-freezing heat preservation work state). The indicator light
circle indicates orange.
[Introduction on Mode]
[Memory Function]
Cleaning and care
0DNH
sure that the heater is unplugged from the mains socket and has cooled to
room temperature before cleaning.
Clean the heater with a damp cloth and thoroughly dry off before use again.
SPECIFICATIONS
Ratings:220-240V~50Hz
1500W
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
We apologise for any inconvenience caused by minor inconsistencies in these
instructions, which may occur as a result of product improvement and development.
When the power of the heater is not cut off or the heater keeps under Standby
0RGH
,
it can memorize the last working mode and setting temperature and works at the
setting temperature after turning on, the memory data will be reset if the power supply
of the heater is cut off, and the setting temperature of the heater recovers to the
default setting (Normal
0RGH
, high, setting temperature is 35
℃
) when turning on.
26