manualshive.com logo in svg

Bego Nautilus CC plus, Manual, Page: 70 / 88

Share
Download
Bego Nautilus CC plus Manual Download Page 70

70

86

10

5 B

A

-en

/00

English 

⋅ 

Nautilus

®

 CC plus 

⋅ 

Nautilus

®

 T

en

Service and Maintenance

Service

If necessary, clean the device on the outside with a 
dry or slightly damp cloth.
Check the casting chamber daily for contamination 
(casting pearls) and if necessary clean with cloth or 
vacuum cleaner.
Do not use abrasive cleaning agents as they may 
damage the coating of the induction coil (see illus-
tration). The coating reliably prevents short-circuits 
in case of any contamination between the coil 
windings (casting pearls).
The coating can wear off through regular use. This 
is unavoidable and does not constitute any reason 
for complaints. The operation of the device is 
guaranteed regardless of the condition of the 
coating.

DANGER

Warning of electric shock! Danger 
to life!

Switch the device off and disconnect it 
from the power supply before carrying 
out any service or maintenance work!
(for power connection without mains 
plug: remove fuses, secure the 
devices against restart and make sure 
that it is not live)

WARNING

Burn hazard from hot parts!

Carry out maintenance and cleaning 
work before casting or after the device 
has cooled down. 

Summary of Contents for Nautilus CC plus

























































































Reviews:

No comments