INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed including the following:
CAUTION! ALWAYS MAKE SURE THE POWER IS TURNED OFF before starting the installation.
1. Measure, locate fixture’s position, and mark locations for the brackets.
2.
Secure brackets to ceiling as shown below. (HARDWARE BY OTHERS)
3. Wiring fixture to power supply, shall be performed by a certified electrician, and wired in a manner that
complies with all local and national electrical codes, as well as the manufacturer’s wiring diagram.
4.
Proper replacement of a part removed for user manintenance.
SE UNV
Beghelli U.S.A., 3250 Corporate Way, Miramar, Florida, Tel: (800) 726-4316 Tel: (954) 442-6600 Fax: (954) 442-6677
9/16/2019
Page 1 of 4
WIRING
TEMPESTA PLUS (TA PLUS-LED)
TM
