926000143
MAINTENANCE
1. BeLuce Canada Inc. strongly recommends testing and maintenance in compliance with all Code requirements.
2. The lamps listed herein when used according to the instructions with this unit are in accordance with the requirements of CSA Standard
C22.2, No. 141 – Unit Equipment for Emergency Lighting.
3. Clean faceplates/lenses on a regular basis.
CAUTION:
Always turn off AC power before servicing. The servicing of any parts, should be performed by qualified
service personnel. The use of replacement parts not furnished by BeLuce Canada Inc. may cause
equipment failure and will void the warranty.
TROUBLESHOOTING
EXIT SIGN DOES NOT COME ON AT ALL
i.
Check AC supply - be sure unit has 24 hour AC supply (unswitched).
For Self-Powered
ii.
AC supply is OK, and indicator light is out, replace PC Board Assembly.
iii.
This could be the result of a switched AC supply to the unit (which has been turned off at some point).
SAVE THESE INSTRUCTIONS
BeLuce Canada Inc., 3900 14th Avenue, Markham, ON L3R 4R3 P: (905) 948-9500 F: (905) 948-8673
