NVGEW V90800L / V90801L / V90802L / V90803L / V90805L
INSTRUCTION MANUAL
E09060060 / 1494.0409E / V. 1.8
Beghelli PRÄZISA GmbH
Page 3 of 5
E-mail:
Internet:
www.beghelli.de
* REMARKS:
ATTENTION !
>
CONNECT
LOAD
AT
FIRST
BEFORE
SWITCHING
ON
NET
AND
BATTERY
VOLTAGE
>
TOTAL
OUTPUT
POWER
(OUT1 + OUT2):
Incandescent lamps:
max. 120 W
Fluorescent lamps with inductive control gear:
max. 120 W,
the DIP switch SW1 must be set at „AC/DC OUT“ in the position
OFF
,
possibly present compensation capacitors must be removed from J32 and J33,
compensation capacitors can be connected to J34 or J35 if required
Fluorescent lamps with electronic control gear:
max. 120 W,
the DIP switch SW1 must be set at „AC/DC OUT“ in the position
ON
>
USE
WITHOUT
CENTRAL
(LOGICA
S
OR
LOGICA
FM):
The DIP switch SW1 must be set at „BS/DS“ in the position
OFF
for the use of light switches on J25 / J26 or to implement the operating mode non-
maintained operation. The DIP switch SW1 must be set at „BS/DS“ in the position
ON
to implement the operating mode maintained operation.
>
USE
WITH
CENTRAL
(LOGICA
S
OR
LOGICA
FM):
The function AUTODIMMER must be assigned over the central (Logica S or Logica FM) to the NVG for the use of light switches on J25 / J26. The position
of the DIP switch 1 on SW1 is not relevant.
CAPACITORS
MAGNETIC CONTROL GEAR
NVG
STARTER
STARTER
ILLUMINANT
230 V AC IN
OUT2
OUT1
ILLUMINANT
MAGNETIC CONTROL GEAR
