H E X M I X S Y S T E M
H E X P A N D E R
U S E R M A N U A L
E X T E N D E D
R E F E R E N C E
S E N D S & R E T U R N S
.9
Auxiliar Returns
Returns are stereo, having a switch to select if the signal is coming
from synth or line level. Like this levels can be adecuated, for
example, either to a guitar pedal or a FX module at synth level.
Use H (High) for synth signals, and L (low) for line level signals.
If you want to use returns with mono signals, use L IN as mono
input.
Auxiliar Sends
An aux send, is a secondary mix usefull to add FX to
more than one channel at time.
Every channel have three controls, for sending signal to
one of each auxiliar send.
Every auxiliar send bus has a master volume pot, that
will control the level of the signal sent. There are two
jacks available so it is possible to send the signal pre or
post fader in paralell, allowing to patch externally
depending if its desired to have the original siganl sent
even if channel is muted.
Flip PFL switch to send the
channel to the headphones
out.
E X T E N D E D
R E F E R E N C E
M O N I T O R S E C T I O N
With PFL/Master Pot
you can do a crossfade
between the master
signal and every
channel sent to PFL,
allowing you to listen
to every track before
adding them to the
mix.
Level meter will show
the level of the sum of
all active PFLs. When
there is no PFL active,
it will show master
level.
Headphones pot will
control headphones
out volume.
