C R U S H D E L A Y
P O W E R & I N T R O
P O W E R I N G
T H E M O D U L E
U S E R M A N U A L
T H A N K S F O R P U R C H A S I N G A M O D U L E F R O M B E F A C O !
B E F O R E Y O U P L U G T H I S M O D U L E I N . . .
1.
Disconnect your cabinet from the mains.
2.
Triple check the power cord polarity.
The coloured line on the cable
(pin number one) is the -12V rail.
3. If you plug the module backwards you might burn it out and
unfortunately this is not covered by the warranty.
4. If you have any questions about this product please send them to:
I N T R O D U C T I O N
W H A T I S C R U S H D E L A Y ?
Crush Delay is an special Echo-Delay unit based on the PT2399 IC, which although able to offer 400ms of
clean delay, having a special talent for generate noisy textures. The module bases its operation on control the
PT2399 chip with circuit bending techniques, converting the unit in an advance VC digital noise generator.
This third version comes with some interesting new features like redesigned VCAs circuits, more clean range
and less depth.
M O D U L E
R E F E R E N C E
P A N E L O V E R V I E W
1.
Time
Manual and CV control for the
delay time. The signal starts to
Crush from knob middle position
to fully clockwise.
2.
Feedback
Amount of feedback present in
the signal path. It can be set
either manually and CV via its
dedicated input.
3.
In Vol
Volume of the main input signal.
Its dedicated CV input allows it to
act as a regular VCA circuit.
4.
IN
Main audio input of the module.
5.
OUT
Main audio output of the module.
.1
6.
Dry/Wet
Amount of Dry and Wet signals
present in the output. It can be
set either manually and CV.
7.
Ret Vol
Volume of the signal present in
Return input. Its dedicated CV
input allows it to act as a regular
VCA circuit.
8.
Return
Return audio input. Its summed
to the main audio input before
enters into the delay circuit.
9.
Send
Outputs the fully Wet signal.
10.
Crush Section
On/Off switches and gate inputs
for the different Crush settings.
