•
Do not pick up liquids, wet, hot or smoking, burning objects (like cigarettes, spilled
milk, etc.)!
•
Keep toxic material (chloride, cleaning supplies, etc.) away from the device!
•
Do not dip into water!
•
Never use without filters!
•
Do not leave the device unguarded while it is in work!
•
Keep away from children! Be extra cautios using the device with children around!
•
Unplug the device after use. Only remove filters when not powered. Turn off all
controls before unplugging by pulling the plug and never the cord!
•
When using cord rewind function, pay attention to the plug not to hit any object.
•
Make sure the cord is away from sharp edges or heated surfaces in order to avoid it
being cut or burned. Never pull the device by the cord.
•
Store it indoor and in room temperature.
•
Using damaged device is strictly prohibited! If it got dropped spilled on
or suffered any kind of damage, show it to a professional. Never try to
disassemble and always leave the servicing to professionals!
Overheating
•
Do not use for more than 30 minutes at a stretch!
Let the motor cool for
about 30 minutes!
•
The vacuum cleaner is equipped with thermostat which automatically shuts off the
motor in case of overheating. Turn off and unplug the cleaner.
•
Make sure the dust cup is empty and the filters and openings are clean!
How to Use the Vacuum Cleaner
After studying the Safety Instruction and getting to know the rest of the Manual you are
ready to use the equipment.
Assembling
1.)
Press the two buttons by the edge of the hose and then slightly push the hose until
you hear it click.
2.)
Connect the tube to the hose.
3.)
Attach the cleaning head to the tube.
Connecting to Electricity
After assembling the vacuum cleaner, pull out the cord from the back of the appliance.
There is a yellow mark in the cord signaling the optimal length – please do not pull the
cord further, in order to protect both the cord and the cord rewind mechanism.
Turning On
Use the On/Off switch on the top of the body, after connecting the vacuum cleaner to
the power supply.
Controlling Vacuum Power
The vacuum power can be adjusted by turning the On/Off switch clockwise or
counterclockwise. Thus you can save energy in cases when using with limited power
output is enough.