7
UsE And MAIntEnAnCE
• Use only the charging cable supplied with the product, excluding any other USB cable.
• If the vehicle does not respond, move closer to the vehicle and try again.
• If the vehicle loses power and moves slower, it may be necessary to replace the batteries and to check the wheel mecha
-
nism for lint, thread, hair or dust.
• To avoid damages, never drive the vehicle on a wet floor, on sand, or in mud, rain or snow.
• Do not expose the vehicle to extreme temperatures.
• To protect the vehicle’s wheel mechanism from lint, thread, hair, and dust particles, you can use a small brush, tweezers or
tie a small bit of cloth to the tip of a toothpick, etc., and wipe off.
• Always keep vehicle clean, use a dampened cloth to wipe off, and then wipe all the water off with a dry cloth. Never use
chemicals to clean the product.
• Avoid holding the wheels when rotating, this will cause the electronic components to short circuit, overheat and cause
malfunction.
• Long period of play time can generate high heat level which causes wear and tear. To extend product life, it is suggested
to allow 10 minutes of cool down period after long period of operation.
dAMAGEs not CovEREd BY thE stAndARd WARRAntY:
• Damages that are caused by a improper use of the toy (shocks, falls…)
• Damages resulting from any non-compliance with manufacturer instructions (power supply ...)
• Cosmetic damages (scratches, ...)
• Components and parts which require regular renewal: batteries, power supply...
• Damages to the toy after an intervention by any person not authorized by BeeWi
European Union directives Conformance statement
Hereby, VOXLAND declares that this product is in compliance with:
• The essential requirements and other relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.bee-wi.com
.
Caring for the environment by recycling
Do not dispose of electrical devices or accessories with your household waste.
In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact
your regional authorities for more details.
Federal Communications Commission
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Canada Compliance statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two condi
-
tions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003
Copyright and other legal information
BEEWI is a registered trademark. Other trademarks mentioned herewith are owned by their proprietors. All other product or
service names are the property of their respective owners.
The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these products.
This product is covered by a 2-year product warranty which is valid from the date of purchase. Users are not permitted to
make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible
for compliance will void the user’s warranty. Please visit our website
www.bee-wi.com
for more information.
Technical support:
.