BeeWi BBS020, User Manual

Page: 7 / 76

7
Search for Bluetooth devices in the phone, select “BeeWi BBS020” on
display and enter the pass key “0000” to add the speaker to the pair list.
When pairing is complete, the blue and red LED light will stop flashing,
and the speaker will automatically connect to the phone and go in standby
mode with the blue light flashing every 3 seconds.
Check the connection by placing a call from your phone.
2.5. Status indicators
2.6. Connection
The speaker automatically connects to the last connected device when it is
turned on. If the device is not found, the speaker will connect to a previous
device in the paired list.
In case the connection is not made automatically, it is possible to reconnect
manually either from the speaker by pressing the mFB or from the mobile
device (refer to the phone user manual). It is also possible to disconnect
the speaker either manually or by moving out of range. When losing
Status LED Descriptions
Power On Blue 3 seconds flash
Power Off Red 3 seconds flash, then Off
Pairing Blue/Red Alternated blinking
Standby mode
(Connected)
Blue Blinking every 3 seconds
Standby mode
(Disconnected)
Blue
Blinking twice every 3
seconds
During Communication Blue Blinking every 6 seconds
Low Battery Red Blinking every 3 seconds
Charging Red Light on
Charging Completed Red Light off
ENGLISH