11
DMK SC 016-3C
1/10/2014
3.2 Power supply
The machine must have a 220v 50 Hz power supply.
Warning
:
It is forbidden to position the device in such a manner that it is difficult to
unplug the unit.
3.3 Presentation of settings
3.3.1
Stop/Start - ventilation speed selection
This switch allows you to start the system and select the ventilation speed (position I or II
-
Low speed = position 1
-
High speed = position 2
3.3.2
Automatic or Manual mode
This button (Auto/manual) allows you to adjust the management of your air treatment. Your
machine is equipped with a probe which analyses your interior air and in automatic mode controls
the need for air treatment according to the level of pollution detected.
In manual mode you can regulate the air treatment according to your own personal needs. (time
restrictions, specific pollution sources, odours etc)
In automatic mode
Position speed 1
: The probe controls the start of air treatment in low speed
Position speed 2
: The probe controls the start of air treatment and moves to high speed when
any pollution is detected. Your unit moves to low speed and stops the treatment once the level of
pollution is low.
In manual mode
Speed 1 position: Air treatment is activated and ventilation speed is low (I)
This switch allows the unit to be switched on (position I or position II) or off (position O). For
technical interventions the unit must be switched off (position O) but also unplugged.
Speed 2 position: Air treatment is activated and ventilation speed is high (II)
