Install the SIM and Battery:
Unlock the battery compartment cover.
Insert the SIM card with correct direction in the
SIM tray in battery compartment (Refer Figure
2).
Install the supplied 3.7V Li-ion battery in to the
battery compartment (Refer Figure 2).
Lock the battery compartment cover back.
Connect the Phone:
Connect the handset with base unit by using coil cord (Refer Figure 1).
Plug the power adaptor in to the DC 5V USB port on the base (Refer Figure 3).
Charge the battery for 6-8 hrs. before initial use.
Press and hold the
“Power ON/OFF”
( ) key to switch
“ON”
the 4G Fixed Wireless
Phone. “beetel” will be displayed on the LCD display for some time.
After that service provider name will appear on the LCD display which indicates that now
your phone is ready to receive and make calls. (If signal strength is very poor at the
location of phone and
“Emergency”
appears on the LCD display then it is
recommended to install the phone at some other location where there is better signal
strength).
Also check the Wi-Fi Hotspot ( ) and data upload/download ( )icon will appear on the
LCD display which indicates that now your phone is ready for use as Wi-Fi Hotspot
function.
Set the time and date manually:
For setting the time and date on LCD display refer page 40
Note: As the default date and time setting is at “Automatic date & time”, so the phone auto select the
date and time after synchronising with SNTP (Simple Network Time Protocol
)
INSTALLING YOUR PHONE
Connect Switching
Adaptor Here
Figure 3
SIM
Insert SIM here
with correct
direction
SIM Tray
Figure 2
Place the
battery here
BA
TTER
Y
Figure 1
It is recommended to always use power adaptor
when Phone is connected as Hotspot.
