14
(washer is securednext to the regulator nut). Some regulators have the washer built-in.
If so, please disregard.
• Insert plastic washer into regulator nut and screwregulator nut onto CO2 cylinder valve.
• Tighten using an adjustable wrench.
INSTALL CO2 AIR LINE HOSE TO REGULATOR
• Attach one end of the (red) air line hose to the hose barbconnection on the
CO2regulator.
• Secure air line by using the adjustable clamp supplied atthe end of the hose.
SET CO2 REGULATOR
• Before opening the main valve located on top of theCO2 cylinder, make sure
“secondary” shut off valve is in the closed position (left or right)
• To open the main CO2 cylinder valve (slowly) turnthe main valve counter
clockwiseuntil fully open
SET CO2 REGULATOR PRESSURE
• Follow the instructions included with your regulator
• When pressure holds at desired psi, turn “secondary”shut off valve straight down (south)
to introduceCO2 to keg only after keg is tapped.
See keg tappingfor instructions.
Important: The psi pressure on the regulator shouldbe set between 8-10 psi
.
IMPORTANT: Make sure your keg is tapped and beer faucetis in the offposition(faucet handle
straight back) before turning on secondaryshut off valve
⑦
Securing the co2 tank on the beer dispenser
Lock the metal button from one-end of the CO2 tank band to the fixing hook inside the unit. Place
