INSTALLATION INSTRUCTIONS
•
Wiring:
Carefully check the various connections before final connection and take care to insulate the wires
that are not used.
•
Luminosity sensor:
Install the luminosity sensor on the windshield and be sure that it is away from
potential dark zones.
•
Control box:
Install the control box at an easily accessible place under the dashboard, if you need to adjust
the sensitivity.
USE OF THE SYSTEM
1.
Switch ON:
Press on the “ ” button of the sensor, the button lights up to indicate that the system is active.
2.
Switch OFF:
Press on the “ ” button of the sensor, the button lights off to indicate that the system is
inactive.
3.
Adjustment of the time of lighting of the headlights:
Press 1 time on the “ ” button of
the sensor, the “20s” LED flashes to indicate that the headlights will remain lit 20 seconds. / Press 2 times on the
“ ” button of the sensor, the “30s” LED flashes to indicate that the headlights will remain lit 30 seconds. / Press
3 times on the “ ” button of the sensor, the “40s” LED flashes to indicate that the headlights will remain lit 40
seconds. / Press 4 times on the “ ” button, no LED is flashing, which means that this function is disabled. / Press
another time on the “ ” button, to return to the original setting.
4.
Adjustment of the sensitivity of the sensor:
Take care not to set this function inside, but solely
with natural light, in a ventilated space. To regulate this function, press on the “ ” button for 3 seconds, when the
system is active and when the vehicle is unlocked. The 3 LEDs will flash to indicate that the natural light is restored.
9
