Beem Pro Multi-Grill 3 in 1, User Manual

Page: 23 / 54

21
EN Multi-Star 3 in 1
BEEM - Elements of Lifestyle
To replace the hotplates, proceed as fol-
lows:
Lift up the lid locking latch (5) and
‹
open the lid (6).
Push up both locks of the upper hot-
‹
plate (7) at the same time and fold the
hotplate (8) forwards.
Remove the upper hotplate and insert
‹
the new hotplate into the lower guide.
Fold the hotplate towards the lid until
‹
it audibly snaps in.
To replace the lower hotplate, push
‹
forward both locks of the lower hot-
plate (10) at the same time and fold
the hotplate (9) upwards.
Remove the lower hotplate and insert
‹
the new hotplate into the rear guide.
Fold the hotplate downwards until it
‹
audibly snaps in.
NOTE
Always use two hotplates of the ►
same type.
Before using, check that the hot-
►
plates are seated properly.
Opening/closing the lid
To open the lid, push the lid locking
‹
latch (5) forward and lift the lid (6).
To close the lid, slowly press the lid
‹
(6) down and push the lid locking latch
(5) over the recess for the lid locking
latch (11).
Before using for the first time
Insert a hotplate set into the appliance
‹
as described in the section Replacing
the hotplates .
Wipe the hotplates (8 and 9) with a
‹
damp cloth.
Lightly oil the hotplates with vegetable
‹
oil and fold the lid down.
Insert the plug into a mains socket.
‹
The red power indicator (2) lights
up, the green temperature indicator
(3) lights up and the appliance starts
heating. This can take a few minutes.
NOTE
Due to production residue (grease), ►
it is possible that a new appliance
may smoke lightly. Ensure sufficient
ventilation.
Wait until the green temperature indi-
‹
cator (3) extinguishes.
Pull the plug out of the mains socket
‹
and allow the appliance to cool down
completely.
Clean the appliance and the acces-
‹
sories as described in the section
Cleaning and care .
Switching the appliance ON/Off
The appliance is not equipped with an on/
off switch. The appliance is in operation
when the mains plug is plugged in.