EN
40
Problem
Possible cause
Fix
The fuse in the fuse
box is triggered.
Too many devices connected
to the same circuit.
Reduce the number of devices
in the circuit.
No error can be identi
fi
ed.
Contact our customer service
department.
Water runs out of
the device.
There is too much water in the
water tank (
13
).
Do not over
fi
ll the water tank!
The coffee runs
very slowly into the
jug.
The drip stop is blocked.
Clean the
fi
lter insert (
16
) with
drip stop.
The device is furred up.
Descale the device (see the
“Cleaning and Care” chapter |
“Descaling”).
The coffee is too
weak.
There is too much water in the
water tank.
Only pour the quantity of
water required for the number
of cups you want into the
water tank.
The ground
coffee does not
drop into the
fi
lter
compartment.
The grinder shaft is blocked.
Clean the grinder shaft (see
the “Cleaning and Care”
chapter | “Cleaning the
Grinder Shaft”).
A large amount of
steam is produced in
the brewing process.
The device is furred up.
Descale the device (see the
“Cleaning and Care” chapter |
“Descaling”).
During use, an
unpleasant smell is
detected.
Is the device being used for
the
fi
rst time?
A smell often develops when
new devices are
fi
rst used.
The smell should disappear
once the device has been
used several times.
Has the device just been
descaled?
Rinse out the device with clear
water.
02041_DE-EN-FR-NL_A5_V1.indb 40
02041_DE-EN-FR-NL_A5_V1.indb 40
03.08.2017 11:39:02
03.08.2017 11:39:02
