31
EN
The message
REINIGEN
(clean) regularly appears on the display (
10
) as a reminder that
the device needs to be cleaned or descaled. The symbol disappears again after two run
throughs.
Storage
Disconnect the device from the mains power when it is not going to be used for a prolonged
period. Clean the device again if necessary (see the “Cleaning and Care” chapter) and let it dry
completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the customer
service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Fix
Nothing is shown on
the display (
10
).
Is the mains plug inserted in the
plug socket correctly?
Insert the mains plug.
Is the plug socket defective?
No mains voltage is present.
Try another plug socket.
Check the fuse of the mains
connection.
Is the display defective?
Contact our customer service
department.
The fuse in the fuse
box is triggered.
Too many devices connected to
the same circuit.
Reduce the number of devices
in the circuit.
No error can be identi
fi
ed.
Contact our customer service
department.
Water runs out of the
device.
Is there too much water in the
water tank (
7
)?
Do not over
fi
ll the water tank!
The coffee runs very
slowly out of the coffee
outlet (
5
).
Is the coffee outlet clogged?
Clean the coffee outlet.
Is the device scale-encrusted?
Descale the device (see the
“Cleaning and Care” chapter –
“Descaling”).
03840_DE-EN-FR-ES-IT_Inlay_A5_V3.indb 31
03840_DE-EN-FR-ES-IT_Inlay_A5_V3.indb 31
16.01.2019 09:44:22
16.01.2019 09:44:22
