21
EN
Filling the Water Tank
1. Open the lid (
1
).
2. Pour the quantity of water required for the number of cups you want (maximum 8 cups) into
the water tank (
7
).
3. Close the lid. You must hear and feel it engage.
All of the water in the water tank is always used.
Pouring In Coffee Powder
1. Open the lid (
1
).
2. Insert
the
fi
lter holder into the
fi
lter compartment (
2
).
3. Insert the permanent
fi
lter or a
fi
lter paper (size 1x4) into the
fi
lter holder.
4. Add the quantity of coffee powder you want to the
fi
lter directly using the measuring spoon
which is supplied with the device or another suitable spoon. We recommend one level spoon-
ful for each 125 ml cup.
5. Flip the lid shut. You must hear and feel it engage.
“Added Flavour” Function
If you like your coffee a little stronger, you can switch on the “Added Flavour” function. Note here
that the
fl
ow time will be extended as a result.
Touch the
fi
eld
PROG
(
17
) for approx. 3 seconds until
(
14
) is shown on the display
(
8
).
The “Added Flavour” function remains selected and is used each time you make coffee until the
PROG
button is pressed again for approx. 3 seconds.
then goes out on the display and the
function is switched off.
Drip Stop
The device has a drip stop which prevents water from dripping out of the
fi
lter compartment (
2
)
when the thermal jug (
6
) is removed from the device.
When the device is in operation, the
fi
lter compartment must be closed and the thermal jug with
the lid placed on it must be placed beneath the
fi
lter compartment. The lid of the thermal jug
pushes the drip stop upwards and the coffee can
fl
ow from the permanent
fi
lter through the lid
into the thermal jug.
During the brewing process, the thermal jug
must not be removed from the main unit for
longer than 30 seconds
as otherwise the permanent
fi
lter could over
fl
ow.
09886_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 21
09886_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 21
26.06.2020 13:27:23
26.06.2020 13:27:23
