21
EN
80°C
ideal for oolong tea, green tea, inhalation solutions
90°C
ideal for fruit tea, pour-over coffee, French press, hot-water bottle
100°C
ideal for black tea, herbal tea / boiling water
These speci
fi
cations are merely guides –
ALWAYS
follow the manufacturer’s speci
fi
cations
and for example with baby food or milk powder carefully check beforehand whether the
temperature is really suitable.
Cleaning and Care
NOTICES
•
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These may damage the surface.
1. Empty the device completely.
2. Wipe down the kettle (
8
) and the base station (
5
) with a damp cloth. If necessary, use a
little mild detergent to remove more intense soiling.
3. Take out the limescale
fi
lter (
9
) inside the kettle by pressing down the locking lug and clean
it.
4. Keep the kettle and the base station ready to operate.
Descaling
Limescale deposits have an adverse effect not only on the quality of the water, but they also
cause power losses and shorten the lifespan of the device. The thicker a limescale layer is, the
more dif
fi
cult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in
accordance with the water quality and how often the device is used (approx. every 2 – 6
weeks).
The
fi
rst indications that descaling is required are a large amount of steam being produced
and slower boiling of the water. Limescale deposits on the bottom of the kettle can cause the
device to switch off prematurely.
For descaling we recommend the
BEEM Premium Descaler Concentrate.
The ef
fi
cient, food-safe
and environmentally friendly
BEEM Premium Descaler Concentrate
is available from selected
specialist stockists, via our website
www.beem.de
or from our customer service department on
request.
Descaling with the BEEM
Premium
Descaler Concentrate
1. Fill the kettle (
8
) with a concentrate/water solution of no more than 1:20 (one part concen-
trate to 20 parts water).
Do not
fi
ll the kettle all the way up to the
MAX
marking to prevent any splashing or
over
fl
ow if the descaling agent causes foaming of the water.
Summary of Contents for 08851
Page 60: ......