EN
32
11. Press the button
(
18
) to switch on the grinder and start the brewing process. The op-
erating status indicator
lights up and
g
appears on the display.
Freshly ground coffee is
transported through the grinder shaft (
14
) into the
fi
lter compartment and then hot water
is poured over it to brew it.
If the brewing process is to be aborted prematurely, press the
button. The operating
status indicator
goes out and the device is switched off.
goes out on the display.
At the end of the brewing process, the device switches off automatically. The operating status
indicator
goes out.
g
goes out on the display.
If the
keep-hot function
has been switched on beforehand, the device remains in opera-
tion for up to 40 minutes and the operating status indicator
continues to be lit.
fl
ashes on the display as long as the keep-hot function is switched on. More information
can be found in the “Handling and Operation” chapter | “Keep-Hot Function”.
Making Coffee with Coffee Powder
1. Activate the display (
19
) (see the “Handling and Operation” chapter | “Display Lighting”).
2. Fill the water tank (
13
) (see the “Handling and Operation” chapter | “Filling the Water Tank”).
3. Open
the
fi
lter compartment (
5
) by pressing the release button for the
fi
lter compart-
ment
(
4
).
4. Insert the permanent
fi
lter (
17
) or a basket
fi
lter paper (see the “Handling and Operation”
chapter | “Inserting the Filter”).
5. Add the quantity of coffee powder you want to the
fi
lter using the measuring spoon (
10
)
which is supplied with the device or another suitable spoon. We recommend one heaped
spoon for each 125 ml cup.
6. Close
the
fi
lter compartment.
7. Set the desired number of cups with the button
(
25
) (see the “Handling and Opera-
tion” chapter | “Setting the Number of Cups”).
8. Set the desired coffee strength with the button
(
26
) (see the “Handling and Op-
eration” chapter | “Setting the Coffee Strength”).
9. Activate the aroma button and / or switch on the keep-hot function as you wish (see the
“Handling and Operation” chapter | “Aroma Button” and | “Keep-Hot Function”).
10. Press the button
(
20
) to start the brewing process. The operating status indicator
lights up and
appears on the display.
Hot water is poured over the coffee
powder to brew it.
If the brewing process is to be aborted prematurely, press the
button. The oper-
ating status indicator
goes out, the device is switched off and
goes out on the
display.
At the end of the brewing process, the device switches off automatically. The operating status
indicator
goes out and
goes out on the display.
02041_DE-EN-FR-ES-IT_Inlay_V4.1.indb 32
02041_DE-EN-FR-ES-IT_Inlay_V4.1.indb 32
28.01.2019 15:12:24
28.01.2019 15:12:24
