Software settings
1.Double-click "Matrix Controller" to open the application, as
shown below:
2. Click “Settings” to enter the connection between the matrix
and the software. For example, the computer serial port is
“com1” and the matrix identification code is “1” ,like the
follow figure shown:
The baud rate is 9600.
The serial port address you set must be the same as the port
address of the connected computer.
The matrix identification code you set must be the same as
the address when using the serial port control matrix.
2. After the operation is completed, click “Settings” to confirm,
then click “Connect” to establish contact with the matrix.
Software control input and output channel correspondence
a) One By One: Quick corresponding display button (equivalent
to OTO button)
After clicking, the input channel and the input channel are
displayed correspondingly (for example, the 3rd input
channel is displayed on the 3rd screen).
3.Software Operation