BeefEater 1500 Series, Assembly And Operating Instructions Manual

Page: 17 / 28

17
OPERATING INSTRUCTIONS
Control functions
Before lighting the barbecue:
• Check that all hoses and gas fittings are tight
• Open the roasting hood
• Check all control knobs are in the ‘OFF’ position
• Ensure that the cooking surfaces are clean
• Turn the gas isolation valve ‘ON’
Lighting instructions
• Do not attempt to light burners with the cooking surfaces
covered
• Read instructions before lighting
• To light a burner, depress the knob and rotate to .
The starter mechanism will click and the burner
will light
• If burner did not light, depress knob and turn back to
the ‘OFF’ position
• Allow several minutes for gas to disperse then repeat
lighting procedure
• Once ignited, the knob can then be turned to the
desired heat setting. The knob does not need to be
pushed in while selecting the heat setting
OPERATING INSTRUCTIONS
OFF IGNITE HIGH LOW