2. Packing List
1 x Caddy Frame
2 x Rear Wheels
1 x Battery Pack (Battery, Bag, Leads)
1 x Charger
1 x Tool kit
1 x Scorecard Holder
1 x Umbrella Holder
1 x Carrying Bag
3. Assembly Instructions
Please read and follow these instructions carefully, and you will be ready to go in a few minutes.
Unfold the frame by pulling the lower and the upper frame tubes apart and locking them together
with the frame lock mechanism. The lock has two notches to adjust the handle height.
.
1. Fit the rear wheel by releasing the quick catch on the outside of the wheel while inserting the
wheel onto the axle. Push the wheel all the way in so that the two pins on the axle fit into the wheel
to engage the clutch and release the quick catch. The wheel should be fully secured. Make sure that
the right wheel is attached to the right side and the left wheel to the left. Reverse the action to
remove the wheel.
2. The battery cable is fitted to connect to either the trolley or to the battery charger. Place the battery
in the battery tray and secure the battery using the Velcro strap. Insert the battery connector into the
plug on the caddy and secure with the connector nut. Make sure the caddy’s power switch on the
handle is in Off position and the speed dial pulled back.
