WARNING
The use of front floor mats is not recommended with BedRug or BedTred floor kits. If floor mats are used, it is
imperative to re-use the removable retention hooks from the factory carpet, installed to the manufacturer’s specifications.
Do not use floor mats or liners with BedTred Kits. Do not use floor mats or liners with BedRug Kits without retention
hooks.
**Please retain these instructions for future reference in your vehicle’s glove box**
BEDRUG
®
BEDTRED
™
CLEANING INFORMATION
The mildew resistant BedRug/BedTred foam will not absorb liquids. The engineered composite surface resists stains and
deterioration from most acids, chemicals, gas and oils, etc. Therefore, by following the cleaning instructions below, your
BedRug/BedTred will remain serviceable for as long as you own your vehicle.
Cleaning your BedRug is easy:
1. A vacuum, broom, brush or compressed air can be used to remove dirt, grime, sand, mulch etc. Due to the
fact that water will not harm the product, pressure washing is also an effective way to clean a soiled
BedRug/BedTred.
2. Although most acids will not harm the BedRug/BedTred, baking soda should be applied immediately to
neutralize the acid to ensure the safety of the paint on the vehicle.
3. To clean tougher jobs such as gasoline, oil, chemicals, acid spills or leaks from your BedRug/BedTred use
detergent soap with degreaser and water, then rinse thoroughly. This detergent soap is used in most car wash
locations with pressure washing equipment. The polypropylene closed-cell foam will not absorb water and
the composite surface dries in minutes.
If you have additional questions, call BedRug Inc. customer service at 800-462-8435.
LIMITED WARRANTY
BedRug Inc. warrants BedRug and BedTred products for Jeep vehicles for three years from the original date of purchase.
Warranty is limited to the original purchaser and is not transferable. Product is warranted to be free from defects in
materials and workmanship. The warranty is void if the product has been damaged by accident, unreasonable use,
neglect, improper service/installation/removal, modifications, acts of God, normal wear and tear, or other causes not
arising out of defective materials or workmanship. Consequential and incidental damages are not covered under this
warranty. Warranty does not cover labor, the cost of shipping, or cost of returning the product for warranty service or
inspection. The terms of this warranty may vary from state to state. You may have rights under specific state laws that
differ from the terms of this warranty. Proof of purchase will be required for warranty service. Product should be cleaned
before return. A return authorization number must be obtained prior to returning any product. For warranty instructions,
returns, and packaging contact BedRug Inc. Customer Service at 800-462-8435.
PRODUCT REGISTRATION
Thank you for purchasing your BedRug product! We would appreciate it if you would take a few minutes to register your
purchase. Registration allows us to provide, with your permission, important updates, service information, helpful hints
or warranty service should you ever require technical support. BedRug offers the option of returning product registration
forms electronically, rather than having to fill them out by hand. You can be assured that BedRug does not share or sell
the information you provide. Save a copy of your sales receipt. Activate your warranty by registering your product online
at
http://www.bedrug.com/customer-service/product-registration.html
or by scanning the QR code. You will need the 6-
digit lot and date code found on the underside of the tailgate, see label example below.
BR-BTJL18R2INST
Rev. 1 3/27/2019
Page 4 of 4
