IMPORTANT INSTRUCTIONS
BEDJET USER OPERATING MANUAL
Revision 1.0
www.bedjet.com
P a g e | 12
Normal Heat Mode
This mode is suitable for gentle warming over extended periods and can be used while sleeping.
It has much longer auto-shutoff times, allowing hours of gentle and luxurious warming.
Maximum heating capacity at max airflow setting is approximately 60% of Turbo-Heat Mode.
See table below for operating parameters.
Cooling Mode
This mode directs dry and refreshing room temperature air into the bed, dispersing
accumulated body moisture and heat. Cooling mode can be used all night with extended Auto-
Shutoff times. See table below for operating parameters.
Air Flow Ranges
Turbo-Heat, Normal Heat and Cool mode each have a different highest-to-lowest adjustable Air
Flow ranges to the bed. For example, the Normal Heat mode 10 Bars/100% Air Flow setting
may correspond to the exact same Air Flow as only 2 bars/10% of the Turbo-Heat mode. This is
normal, as each mode has different Air Flow range requirements. The displayed Air Flow range
on LED display and App is specific to your current setting only
for the currently active mode.
Operating Mode Summary
Mode
Air Flow
Adjustable Range
Specific to Mode
Air Output
Regulated
Temperature
Auto-Shutoff
Time Default
Auto-Shutoff
Time Advanced
Max. Advanced
Auto-Shutoff
Time
Turbo-Heat
Very High to
Moderate Air
115 °F
46 °C
5 minutes
+1 minute
12 minutes
Normal Heat
Moderate to
Very Low Air
109 °F
43 °C
1 hour
+30 minutes
4 hours
Cool
Moderate to
Very Low Air
Room
temperature
from floor*
1 hour
+30 minutes
8 hours
*PLEASE NOTE, ambient room air temperature must generally be below 79 °F (26 °C) for cooling
mode to be effective. BedJet cooling is not a replacement for lack of room air conditioning in
intensely hot or humid bedroom environments, but it can dramatically reduce use of room air
conditioning to save money on utility bills.
