8
If a high reading has been recorded, the monitor can muted by the sound by pressing the volume icon.
To repeat breath test, press the home icon once to return to the home screen and repeat steps 3-8.
To save the reading, press the save icon and select the relevant patient profile.
Remove the D-
piece™ between tests to purge sensor with fresh air.
To switch off, press and hold the power button for 3 seconds, unit will also power off after 2 minutes of
inactivity to save power.
Conducting an ambient test
The environmental air can be tested to
check for CO in the environment using the
Micro
+
™
Smokerlyzer®. This is particularly
useful in the event of a patient reporting a
non-smoker status but providing a breath
reading of that of a smoker suggesting they
have inhaled environmental CO.
This is carried out by pressing the ambient
mode icon on the screen.
The Micro
+
™ will then carry out real
-time
monitoring of the environmental air. To stop
the test, press the home icon.
