Becx Machines OBKS50-35, Manual, Page: 13 / 25

Weed brush – Edge cutter
OBKS50-35
Version: 1
November ’19
Page 13 of 25
2.7. Mechanical components brush
Figure 4: Overview mechanical components brush
Figure 4 Part Description
1 Width adjustment
•
The position of the brush in the width direction can be set by
putting the mounting in a different positioning hole (Figure
4:1)
•
The optimum position depends on the tool carrier and the
operator and is typically set only once.
2 Mud guard
•
The protective mudguard (figure 4.2) makes sure the debris
from the brush don’t get thrown in the wrong direction.
•
The right position can be achieved by different adjustment-
points.
3 Angle adjustment
brush
•
The angle in which the brush brushes the pavement can be
adjusted by un mounting the connecting bolts (Figure 4:3).
4 Brush-mounting
•
When the brush is worn out it can be easily replaced by
unbolting the mounting bolts from the holder-plate (figure
4:1).
1 2 3
4