Weed brush
Type: BECX OB90M
Version: 1
November 2019
Page 11 of 24
3.1
Tool nesting place mechanical components
Figure 2: Overview of tool nesting place mechanical components
Figure 2
Element
Explanation
1
Tool nesting place
•
The unit is fastened to the tool holder using an adapter
(Figure 2:1).
•
The type of adapter and its fastening in the tool holder is
dependent on the type of tool holder.
•
The up and down movement is achieved by controlling the
tool nesting place. The is not part the brush arm, but part of
the tool holder.
1
