Hedge trimmer
Type: HS130HR
Version: 05
December. 2019
Page 23 of 34
5) Maintenance
•
Only components supplied or approved by the manufacturer must be used for
replacement or repair of parts.
•
Always disconnect the hedge trimmer from the feed line when work is carried
out on the machinery. This is done by disconnecting the rapid attachment.
•
Only persons who can show that they have adequate knowledge of
mechanical and hydraulic machinery through their training and experience are
allowed to carry out maintenance work.
Figure 11: grease points
Weekly maintenance
No.
What to do
Action
Result
1
Grease the cutting
head
•
Squeeze grease into the grease nipples on
the cutting heads. (see Figure 11)
•
See 01) Technical data for the grease
specification
2
Tightening the cutter
blade bolts
•
Check and tighten the bolts, the locking
washers and locking bolts on the cutter
blades to ensure that these have been
tightened with the correct torque
(see 5.2 Torque).
3
Visual check
•
Visually check the construction, the
hydraulic aggregate and the cutter blades
for damage and cracks.
Grease points
