© BECOM Systems 2021
19
|
25
Hardware User Manual - TOREO-P650
Last change: 6 September 2021/Version 1
7
Appendix
7.1
Operating Conditions
7.1.1
Input current
The average input current depends on the selected frame-rate (fps) and the integration time (t
INT
). The following
figure shows typical values. The values on the x axis shows the FITP which has been calculated with the following
equation:
𝐹𝐼𝑇𝑃 = 𝑡
𝐼𝑁𝑇
[𝑚𝑠] ∙ 𝑓𝑝𝑠 [
1
𝑠
] ∙ 4
TBD
Figure 7-1: Input current @24V depending on frame-rate integration time product
7.1.2
Temperature at the case
The following figure shows the expected case temperature @ 25°C ambient temperature depending on the
frame-rate integration time product (FITP). The FITP has been calculated as follow:
𝐹𝐼𝑇𝑃 = 𝑡
𝐼𝑁𝑇
[𝑚𝑠] ∙ 𝑓𝑝𝑠 [
1
𝑠
] ∙ 4
TBD
Figure 7-2: Expected cooling plate temperature depending on frame-rate integration time product
The temperature on the casing can be reduced by mounting an additional heat sink on the cooling plate.
Caution
The user is responsible to take care for an appropriate cooling if the Argos camera is mounted
into a case.
Caution
Be careful to not stress the device beyond the limits, otherwise you may damage the device.
