background image

 

© BECOM Systems 2021  

User Manual - PoE-Splitter 

 

Last change: 25 March 2021/Version 3

 

 

4

 | 

15

 

 

 

 

 

© BECOM Systems GmbH 2021 

All Rights Reserved. 

The information herein is given to describe certain components and shall not be considered as a guarantee of 
characteristics. 

Terms of delivery and rights of technical change reserved. 

We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding 
circuits, descriptions and charts stated herein. 

BECOM Systems makes and you receive no warranties or conditions, express, implied, statutory or in any 
communication with you. BECOM Systems specifically disclaims any implied warranty of merchantability or fitness 
for a particular purpose. 

BECOM Systems takes no liability for any damages and errors causing of the usage of this board. The user of this 
board is responsible by himself for the functionality of his application. He is allowed to use the board only if he 
has the qualification. More information is found in the General Terms and Conditions (AGB). 

Information 

For further information on technology, delivery terms and conditions and prices please contact BECOM Systems 

www.becom-group.com

 

 

 

 

 

 

 

Summary of Contents for 150-3078-1
















Reviews: