Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 114 / 498

A13914AF
3-16
System Setup Options
Replicates
Replicates
Introduction
The Replicates option allows the operator to set up the number of replicates per sample, which is
applied to all sample programs. The replicates per sample may also be edited by accessing a specific
sample program.
A maximum of 20 replicates may be assayed from a sample. All results are printed and maintained
in memory for recall.
Setup
From the
Setup
screen, select
7 Replicates
to define the number of replicates or restore the system
Default Replicates value.
The Replicates option may be viewed at any time.
The system must be in Standby or Stopped state to change replicates.
The default for replicates is
1
.
Report Setup
Introduction
This feature allows the operator to select the following options:
•
Enable or disable printing of Patient and Control Reports
•
Define a Report Header to print at the top of each report
•
Select from a variety of Patient Report formats
•
Select from a variety of Control Report formats
•
Define Inter-Laboratory information to print in a report
Default settings:
•
Facility Name:
blank
•
Facility Address:
blank
•
ID Number:
blank
•
Patient Report format:
Lab Report
•
Control Report format:
Control Chart Report