Beckman Coulter Navios Instructions For Use Manual Download Page 407

Page: 407 / 586

773232AH

10-211

Using Navios Software

Database Management

NOTE

allows you to edit all information except Sample ID.

allows you to enter new

specimen information for this patient, as well as edit existing information, including Sample ID; all
demographic information is retained.

Edit the information as needed and

Save

to save the changes.

To enter information for a new patient:

Clear

Enter the information.

Save

to save the input.

You must be assigned System Administrator rights in order to Archive Data or Restore an Archive.

Archive Data

Data from the Report Generator and QC databases can be archived out of the live database for storage
offline.

To ensure sucessful Archive/Restore of QC Records:

•

Make sure there are QC Records remaining in the QC Database (In other words: DO NOT
ARCHIVE ALL QC RECORDS).

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Navios

Reviews:

Related manuals for Navios

Brands by name

Popular brands

Beckman Coulter Navios, Instructions For Use Manual

Search results

Summary of Contents for Navios

Reviews:

Related manuals for Navios

Brands by name

Popular brands