Beckman Coulter Navios, Instructions For Use Manual

Page: 224 / 586

773232AH
10-28
Using Navios Software
File Menu
7
Save Protocol As and enter a protocol name.
New Panel
Use the Panel Wizard to create a Panel for use in the Acquisition Manager or in Manual Acquisition
mode. See
Creating Panels in the System Overview chapter.
New Worklist
NOTE
If no Worklist is visible,
View
>
Acquisition Manager
to display the Worklist pane. See Creating
Worklists in the System Overview chapter.
NOTE
Unless the current Worklist has been saved using the
Save Worklist
button within the
Acquisition Manager Toolbar , current worklist settings are lost.
CAUTION
When editing and saving a panel, any worklist containing the edited panel must
be recreated. If the worklist in not re-created, the panel in the worklist may not
match the newer version of the panel.
Open Listmode File
Use this option to open a new listmode file into all plots.
CAUTION
Risk of erroneous results if the parameter order is changed or parameters are
added or deleted. When parameters are de-selected from a protocol, the
parameter order is changed which impacts remaining plots and associated
regions and gates. To prevent reporting erroneous results, verify the protocols
plots, regions and gates before reporting results.
Before any analysis can be done, a listmode file must be read into Navios software. Most buttons on
the Button Bar are disabled until this has been done.
There are two methods of opening listmode files, Using the File Menu and Using Drag and Drop .
NOTE
Listmode files with mismatched parameters cannot be opened into a locked protocol, by either the
File
>
Open Listmode File
menu item or by using Drag and Drop. The parameters in both the protocol
and the listmode file must match in order to open a listmode file into a locked protocol. Only Navios
listmode files can be opened into a locked protocol.