Beckman Coulter Navios Instructions For Use Manual Download Page 136 | Manualshive

Page: 136 / 586

background image

773232AH

5-30

System Overview

Creating Worklists

Use Instrument Settings from External File

Use Instrument Settings from an External File such as Listmode or Protocol [Settings] files that you
choose from the drop down list box.

This option is not available if

Use instrument settings from previous test

is selected.

Parameter Names

Allows you to choose the Parameter Names for each tube within a Panel.

Creating Worklists

Before Creating Worklists

•

If no Worklist is visible,

View > Acquisition Manager

to display the Worklist pane.

•

Unless the current Worklist has been saved using the

Save Worklist

button within the

Acquisition Manager Toolbar

, current worklist settings are not available.

•

Do not save scheduled AutoSetup Applications as a Worklist. Applications are intended to be
"scheduled". Do not add any protocols or panels to Acquisition Manager that has scheduled
Applications or AutoSetup II protocols. Always select "New Worklist" after scheduled QC
Applications or Autosetup protocols are run.

•

Modifications to a multi-tube panel may impact any associated panel templates or worklists.
Beckman Coulter recommends that all templates and worklists containing a panel that has been
modified be validated before use.

CAUTION

When editing and saving or deleting a protocol or panel, any worklist containing
the edited or deleted protocol or panel must be recreated. If the worklist is not re-
created, the protocol or panel in the worklist may not match the newer version of
the protocol or panel.

1

to create a new Worklist or to clear current Worklist from the

Acquisition Manager

screen.

2

panels and protocols from the Resource Explorer to the

Acquisition Manager

.

Information added in this way always appears at the end of the Worklist.

«
...
134
135
136
137
138
...
»

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Navios

Brand: Bamo Pages: 8

Brand: Eaton Pages: 87

Brand: Eaton Pages: 16

Brand: Saimo Pages: 101

Brand: AEMC Pages: 4

Brand: Jenoptik Pages: 54

Brand: Feature tech Pages: 2

Brand: POSEIDON Pages: 13

Brand: Parkside Pages: 199

Brand: AXE Pages: 5

VACTEST GCD 200

Brand: BUSCH Pages: 12

Brand: Milkotester Pages: 44

Brand: MFJ Pages: 5

Brand: Laguna Tools Pages: 28

Brand: Keison Pages: 56

Brand: DAKOTA ULTRASONICS Pages: 51

Brand: Xylem Pages: 44

Brand: Pfeiffer Vacuum Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands